MINI SK™ Hybrid ESF Starter Kit
Part No. MHYSKT
IMEX™ has developed a MINI SK™ Hybrid ESF
Starter Kit for construction of hybrid frames using mini SK™ components
with our mini circular ESF equipment. This kit was developed for surgeons
with existing MINI SK™ ESF components and experience.
The MINI hybrid esf starter kit contains a moderate variety of
components to allow construction of simple hybrid frames.
| QUANTITY | PART NO. | DESCRIPTION |
| HYBRID RODS (6.3mm diameter, small SK™) | ||
| 2 | 307.125 | 1/8" (3.2mm) x 5" (125mm) Mini Hybrid Rod, 4mm Thread |
| RINGS | ||
| 1 | 4.13501 | Full Ring 35mm |
| 1 | 4.14501 | Full Ring 45mm |
| 1 | 4.14504 | Stretch Ring 45mm |
| FASTENERS | ||
| 6 | 4.30001 | 4mm Cannulated Wire Fixation Bolt (1 pack) |
| 6 | 4.30005 | 4mm Slotted Wire Fixation Washer (1 pack) |
| 16 | 4.30006 | 4mm Hex Nut, Stainless |
| 6 | 4.30008 | 4mm Flat Washer, Stainless |
| 1 | 4.70005 | One-Hole Post, Mini |
| 4 | 4.70007 | 4mm Spherical Nut |
| 4 | 4.70008 | 4mm Spherical Washer |
| 4 | 300.003 | 4mm x 8mm Hex Bolt |
| STOPPER WIRE and ESF PINS | ||
| 6 | 4.40002 | 1.0mm x 125mm Stopper Fixation Wires |
* Mini SK™ linear ESF components are required to utilize this
kit.
