SK™ Small Hybrid ESF Starter Kit
Part No. HYSKT
IMEX™ has developed a Starter Hybrid ESF
Kit for construction of hybrid frames using small SK™ components with
our standard circular ESF equipment. This kit was developed for surgeons
with existing small SK™ ESF component inventory and experience and
is not designed for those with significant inventory of circular ESF components.
The kit contains a large variety of
components to allow construction of advanced hybrid frames or multiple hybrid
frames.
| QUANTITY | PART NO. | DESCRIPTION |
| HYBRID RODS (6.3mm diameter, small SK™) | ||
| 2 | 407.050 | Small 6.3mm Hybrid Rods x 50mm |
| 2 | 407.075 | Small 6.3mm Hybrid Rods x 75mm |
| 2 | 407.100 | Small 6.3mm Hybrid Rods x 100mm |
| 2 | 407.150 | Small 6.3mm Hybrid Rods x 150mm |
| 2 | 407.200 | Small 6.3mm Hybrid Rods x 200mm |
| 2 | 407.250 | Small 6.3mm Hybrid Rods x 250mm |
| RINGS | ||
| 1 | 2.16604 | Stretch Ring 66mm |
| 1 | 2.18404 | Stretch Ring 84mm |
| 1 | 2.16601 | Full Ring 66mm |
| 1 | 2.18401 | Full Ring 84mm |
| FASTENERS | ||
| 6 | 2.30007 | M6 x 12mm Hex Bolts |
| 2 | 2.30003 | M6 x 40mm Hex Bolts |
| 20 | 2.30006 | M6 Hex Nuts |
| 15 | 2.30008 | M6 Flat Washers |
| 6 | 2.30004 | Cannulated / Slotted Wire Fixation Bolts |
| 6 | 2.30005 | Slotted Wire Fixation Washers |
| 4 | 2.30009 | Half-pin Fixation Bolts |
| 4 | 2.70007 | Spherical Nuts |
| 4 | 2.70008 | Spherical Washers |
| PLATES AND POSTS | ||
| 1 | 2.70002 | Two-Hole Ring / Motor Plates |
| 2 | 2.70005 | One-Hole Posts |
| 2 | 2.70006 | Two-Hole Posts |
| FIXATION AND STOPPER WIRE | ||
| 6 | 2.40001 | Fixation Wires 1.6mm |
| 6 | 2.40002 | Stopper Fixation Wires |
| INSTRUMENTATION | ||
| 1 | 2.50014 | Dyna™ Wire Tensioner |
| 2 | 2.50003 | 10mm Combination Wrench |
| 1 | 508.102 | 10mm Angled Socket Wrench |
