KE Linear ESF
In spite of limiting mechanical properties and the necessity for complex frames, the Kirschner-Ehmer fixator has a well-documented history in veterinary orthopedics. Due to the widespread availability of KE components in many practices, IMEX™ continues to produce this fixator. However, the necessary frame complexity and hardware requirements make the KE device less favorable economically, mechanically, and clinically than the SK™ System by IMEX™. It is highly recommended that SK™ components be given priority for initial inventory or upgrade purposes.
Small KE ESF Components
Utilizes 1/8” diameter stainless steel external rods and accepts 3/32” and 5/64” fixation pin shafts. Some consider 1/16” pins acceptable if proper patient selection is considered. Clamps, bolts, and nuts are stainless steel. Wrench flats are 1/4”.
Medium KE ESF Components
Utilizes 3/16” diameter stainless steel external rods and accepts 1/8” and 7/64” shaft fixation pins. Clamps, nuts, and bolts are stainless steel. Wrench flats are 5/16”.
