Large SK™ Clamp, SINGLE
Part No. 500.000
Utilizes 9.5mm diameter external rods and 10mm wrenches. Supports use of
3.0mm shank, medium, medium-plus and large INTERFACE™ and CENTERFACE™ pins
directly through the clamp. Recommended pin shanks 1/8” to 5/32” (3.2mm
to 4.0mm). Maximum diameter accepted is 3/16” (4.8mm). Most commonly
used pin is the medium 1/8” shank pin.
(U.S. Patent # 5,921,985)
Large SK™ Clamp, DOUBLE
Part No. 500.999
For connecting two 9.5mm external rods. Stability provided by positive interlock
between clamps. Two 10mm wrenches required.
Individual Replacement Components
| PART NO. | DESCRIPTION |
| 500.001 | Large Clamp / Bolt Washer |
| 500.002 | Large Clamp Body Pair |
| 2.30007 | 6mm Hex Bolt x 12mm |
| 2.30006 | 6mm Hex Nut |
