6.3mm TITANIUM HYBRID Rods,
6mm Thread
The major, smooth portion of this rod supports small SK™ clamps with its 6.3mm diameter. One end of the rod has 6mm threads so it can be coupled with components of the IMEX™ Circular ESF System. Simple hybrid frames of one ring coupled to a traditional ESF device are possible. Hybrid frames utilize circular ESF technology for very small fracture segments without the complexity of a complete circular ESF frame. Additional use of paired spherical nuts and washers will allow postoperative manipulation to fine tune reduction. These rods are available in length increments of 50mm to 250mm overall length. The threaded portion is approximately 25mm in length
| PART NO. | LENGTH |
| 407.050 | 50mm (Approximately 2 inches) |
| 407.075 | 75mm (Approximately 3 inches) |
| 407.100 | 100mm (Approximately 4 inches) |
| 407.150 | 150mm (Approximately 6 inches) |
| 407.200 | 200mm (Approximately 8 inches) |
| 407.250 | 250mm (Approximately 10 inches) |
6.3mm TITANIUM HYBRID Rods,
5mm Thread
Similar in function and design to 6.3mm titanium hybrid rods with 6mm threads, these hybrid rods are designed to function with the European small bone fixator (SBF) that utilizes 5mm threaded components. Practices using the SBF can now incorporate IMEX™ SK™ technology with their circular ESF devices.
| PART NO. | LENGTH |
| 409.050 | 50mm (Approximately 2 inches) |
| 409.100 | 100mm (Approximately 4 inches) |
| 409.150 | 150mm (Approximately 6 inches) |
| 409.200 | 200mm (Approximately 8 inches) |
| 409.250 | 250mm (Approximately 10 inches) |
